|Manufacturer||Bentley Motors (1931) Limited, Crewe, Cheshire|
|Production||1962–1965 1286 standard S3 saloon 32 long wheelbase S3 chassis 311 Continental chassis|
|Class||Full-size luxury car|
|Body style||4-door saloon|
|Engine||6.2 L Bentley V8|
|Transmission||4-speed automatic transmission|
|Wheelbase||3124.2 mm (123 in) (LWB) 3225.8 mm (127 in)|
|Length||5384.8 mm (212 in)|
|Width||1898.65 mm (74¾ in)|
|Height||1631.95 mm (64¼ in)|
|Kerb weight||1,918 kg (4,228 lb)|
|Related||(with modified engine, transmission and different ultra-light coachbuilt body) Bentley S3 Continental,
Rolls-Royce Silver Cloud III
The Bentley S3 is a four-door luxury car produced by Bentley from late 1962 until 1965.
The S3 was very similar to the S2. The most-visible difference was a four-headlamp layout that paved the way for the radically new Bentley T1 in 1965. The interior was modified with individual seats for front passengers and increased leg room in the rear. The 6.2 L (6230 cc/380 in³) V8 engine continued with minor modifications. The power steering was also improved.
- Bentley S3 saloon: £6,126
- Park Ward Continental sports saloon: £8,495, a premium of about 40%
- for comparison: Jaguar Mark X including all taxes £2,022.
The standard S3 was built in the following quantities per model:
- Bentley S3: 1286 (1 drophead coupé by Mulliner Park Ward)
- Bentley S3 long wheelbase: 32 (7 with coachbuilt bodies by James Young)
Changes from S2
The S3 was first announced and displayed at the Paris Motor Show October 1962. Exterior
- Twin paired headlamps. Stepped up wattage from 120 to 150 increasing forward visibility by at least 250 yards and giving a better spread on dipped beam
- radiator lowered 1½ inches allowing a lower bonnet line; restyled front mudguards with separate flashing indicators (formerly incorporated in the fog and spot lights); smaller over-riders on the bumpers front and rear.
- front passengers now sit behind a fascia brow padded for extra safety and they have individual split-bench seats; the rear seat is two inches further back with modified corners and shoulder padding.
- lighter power steering
- more powerful engine, Horse-power increased 7 percent by employing a higher compression ratio, 9:1 instead of 8:1 and larger carburettors to give higher performance - improved acceleration and a top speed of 115 mph with no loss of economy; for the American market an engine "breather" to reduce air pollution
In 1959, Rolls-Royce acquired H. J. Mulliner & Co., coachbuilders (HJM). In 1961, HJM was merged with Park Ward, which had been in the possession of Rolls-Royce since 1939, to form Mulliner, Park Ward Ltd. (MPW). When production of the S3 Continentals commenced there were more differences than the adaption of the previous HJM design by Mulliner Park Ward: The cars were built at the former Park Ward premises in Willesden, North London. The HJM facilities were abandoned.
The S3 Continental was strictly coachbuilt. Most bodies were of the altered HJM style, available in fixed head or drop head coupe form. Of the 328 coachbuilt S3 (Continentals included here), nearly 100 were by MPW. Again, fixed head or a drop head coupe configurations were available. The most prominent visual difference from the s2 configuration was the four canted headlights.
For the first time, this body was offered on the Rolls-Royce Silver Cloud, as well as the S3 chassis. The final S3 was delivered in 1966, when the new Rolls-Royce Silver Shadow and Bentley T-series were readily available. Like earlier Continentals, the sportier S3 bodywork was manufactured entirely from aluminum, unlike the heavier, steel bodied standard saloon. This, combined with higher gearing and the better compression ratios made for a markedly faster car. Four-doored Continentals bodied by H. J. Mulliner were known as the "Flying Spur", although four-door Continentals by other coachbuilders are sometimes erroneously referred to as "Flying Spurs" as well; the term only correctly refers to Mulliner's versions. Another strikingly elegant four-door saloon for the S3 Continental came from James Young).
Despite being highly desirable, the considerably more expensive Continentals (a premium of 40-50%) were produced in much smaller quantities than the standard S3 saloon, which outsold it by a factor of four.
- Bentley S3 Continental: 311 (291 by Mulliner Park Ward and 20 by James Young)