|Manufacturer||Edsel Division of Ford Motor Company|
The Edsel was an automobile marque that was planned, developed, and manufactured by the Ford Motor Company during the 1958, 1959, and 1960 model years. With the Edsel, Ford had expected to make significant inroads into the market share of both General Motors and Chrysler and close the gap between itself and GM in the domestic American automotive market. But contrary to Ford's internal plans and projections, the Edsel never gained popularity with contemporary American car buyers and sold poorly. The Ford Motor Company lost millions of dollars on the Edsel's development, manufacturing and marketing.
In the early 1950s, the Ford Motor Company became a publicly traded corporation that was no longer entirely owned by members of the Ford family. The company was now able to sell cars according to current market trends following the sellers' market of the postwar years. Ford's new management compared the company's roster of makes with that of General Motors, and concluded that Lincoln was competing not with Cadillac, but with Oldsmobile and Buick. Since Ford had surplus capital on hand from the success of the Ford Thunderbird, the Company developed a plan to move Lincoln upmarket, with the Continental broken out as a separate make at the top of Ford's product line, and to add a premium/intermediate vehicle to the intermediate slot vacated by Lincoln.
Marketing research and development for the new intermediate line had begun in 1955 under the code name "E car",which stood for "experimental car." Ford Motor Company eventually decided on the name "Edsel", in honor of Edsel B. Ford, son of the company's founder, Henry Ford (despite objections from Henry Ford II). The proposed vehicle marque would represent the stand-up of a new division of the firm alongside that of Ford itself and the Lincoln-Mercury division, whose cars at the time shared the same bodies.
Ford later claimed to have performed more than adequate, if not superior, product development and market research work in the planning and design of the new vehicle. Particularly Ford assured its investors, and the Detroit automotive press, that the Edsel was not only a superior product (as compared to its Oldsmobile/Buick competition), but the details of its styling and specifications were the result of a sophisticated market analysis and research and development effort that would essentially guarantee its broad acceptance by the buying public when the car was introduced.
The Edsel was introduced amid considerable publicity on "E Day"—September 4, 1957. It was also promoted by a top-rated television special, The Edsel Show, on October 13, but the promotional effort was not enough to counter the adverse initial public reaction to the car's styling and conventional build. For months, Ford had been telling the industry press that it "knew" (through its market research) that there would be great demand for the vehicle. Ford also insisted that, in the Edsel, it had built exactly the "entirely new kind of car" that Ford had been leading the buying public to expect through its pre-introduction publicity campaign for the car. In reality, however, the Edsel shared its engineering and bodywork with other Ford models, and the apparent similarities were glaring from the perspective of a new car buyer from the moment he (or more rarely, she) viewed the vehicle in person and up close in a new car showroom.
The Edsel was to be sold through a newly formed division of the Ford Motor Company, as a companion to the Ford Division, Mercury Division, Lincoln Division and (newly formed but also short-lived) Continental Division. Each division had its own retail organization and dealer network. The free-standing Edsel Division existed from November 1956 until January 1958, after which Edsel sales and marketing operations were integrated into the Mercury-Edsel-Lincoln division (referred to as M-E-L). Initially Edsel was sold through a new network of approximately 1,187 dealers. This briefly brought the total number of dealers of all Ford products to 10,000. Ford saw this as a way to come closer to parity with Chrysler, which had 10,000 dealers, and General Motors, which had 16,000. As soon as it became apparent that the Edsels were not selling, many of these dealers added Lincoln-Mercury, Ford of Britain, or Ford of Germany franchises to their dealerships with the encouragement of Ford Motor Company. Some dealers, however, closed.
For the 1958 model year, Edsel produced four models:The larger Mercury-based Citation and Corsair, and the smaller Ford-based Pacer and Ranger. The Citation was offered in two-door and four-door hardtop and two-door convertible versions. The Corsair was available in two-door and four-door hardtop versions. The Pacer was available as a two-door or four-door hardtop, four-door sedan, or two-door convertible. The Ranger was sold in two-door and four-door hardtop or sedan versions. The four-door Bermuda and Villager wagons and the two-door Roundup wagon were based on the 116-inch wheelbase Ford station wagon platform and shared the trim and features of the Ranger and Pacer models.
The Edsel offered several innovative features, among which were its "rolling dome" speedometer, warning lights for such conditions as low oil level, parking brake engaged, and engine overheating, as well as its Push-button Teletouch transmission shifting system in the center of the steering wheel (a conventional column-shift automatic was also available at a reduced price). Other Edsel design innovations included ergonomically designed controls for the driver and self-adjusting brakes (which Edsel claimed as a first for the industry, even though Studebaker had pioneered them earlier in the decade). The Edsel also offered such advanced safety features as seat belts (which were available at extra cost as optional equipment on many other makes) and child-proof rear door locks that could only be opened with the key.
Unlike Ford and Mercury, the Edsel Division never had any dedicated manufacturing plants. All Edsels were built in Ford or Mercury plants on a contract basis.
In the first year, 63,110 Edsels were sold in the United States; an additional 4,935 units were sold in Canada. Though below expectations, this nevertheless represented the second-largest launch for any new car brand to date, exceeded only by the Plymouth introduction in 1928.
For the 1959 model year, Edsel fielded only two series, the Ford-based Ranger and Corsair. The larger Mercury-based Edsels were discontinued. Replacing the Pacer as the top-line Ford-based Edsel, the new Corsair was offered as a two-door and four-door hardtop, four-door sedan, and two-door convertible. The Ranger was sold as a two-door and four-door hardtop, two-door and four-door sedan, and the Villager station wagon. In the 1959 model year, 44,891 Edsels were sold in the U.S. An additional 2,505 units were sold in Canada.
For the 1960 model year, Edsel's last, only 2,846 vehicles were produced. All but the pilot cars were assembled at the Louisville, Kentucky, assembly plant. The marque was reduced to the Ranger series of sedans, hardtops, and convertibles and the Villager station wagons. The Edsel shared a basic chassis, glass, and major sheet metal with the 1960 Ford Galaxie and Fairlane models that were built on the Louisville assembly line with it. But the Edsel had its own unique grille, hood, and four upright oblong taillights, along with its side sweep spears. The Edsel's front and rear bumpers were also unique. The 1960 Edsel rode on a 120-inch wheelbase, compared to the concurrent Ford's 119-inch span, and it also used a different rear suspension. The cars did, however, share engines and transmissions.
The 1960 Edsel Ranger four-door hardtop model used the thin-pillar Ford Fairlane four-door sedan roofline, as opposed to the "square" roofline used on the corresponding Ford four-door hardtop, which was exclusive to the Galaxie line. The Galaxie four-door hardtop's rear door trim panel, however, was fitted to the Ranger. This gave the Edsel four-door hardtop a unique body style that was never offered on any 1960 Ford.
End of the Edsel
Ford announced the end of the Edsel program on Thursday, November 19, 1959. However, production continued until late in November, with the final tally of 2,846 1960 models. Total Edsel sales were approximately 84,000, less than half the company's projected break-even point. The company lost $350 million, or the equivalent of $2,756,449,772 in 2013 dollar, on the venture Only 118,287 Edsels were built, including 7,440 produced in Ontario, Canada. By U.S. auto industry standards, these production figures were dismal, particularly when spread across a run of three model years.
On Friday, November 20, United Press International's (UPI) wire service reported that book values for used Edsels had declined by as much as $400 based on condition and age immediately following the Ford press release. In some newspaper markets, dealers scrambled to renegotiate newspaper advertising contracts involving the 1960 Edsel models, while others dropped the name from their dealerships' advertising. Ford issued a statement that it would distribute coupons to customers who purchased 1960 models (and carryover 1959 models) prior to the announcement, valued at $300 to $400 toward the purchase of new Ford products to offset the decreased values. The company also issued credits to dealers for stock unsold or received following the announcement.
Edsel and its failures
Historians have advanced several theories in an effort to explain the Edsel's failure. Popular culture often faults the car’s styling. Consumer Reports has alleged that poor workmanship was the Edsel's chief problem. Marketing experts hold the Edsel up as a supreme example of the corporate culture’s failure to understand American consumers. Business analysts cite the weak internal support for the product inside Ford’s executive offices. According to author and Edsel scholar Jan Deutsch, the Edsel was "the wrong car at the wrong time."
"The aim was right, but the target moved"
The Edsel is most famous for being a marketing disaster. Indeed, the name "Edsel" became synonymous with the "real-life" commercial failure of the predicted "perfect" product or product idea. Similar ill-fated products have often been colloquially referred to as "Edsels". Since the Edsel program was such a debacle, it gave marketers a vivid illustration of how not to market a product. The principal reason the Edsel's failure is so infamous is that Ford had absolutely no idea that the failure was going to happen until after the vehicles had been designed and built, the dealerships established and $400 million invested in the product's development and launch. Incredibly, Ford had presumed to invest $400 million (well over $4.0 billion in the 21st century) in developing a new product line without attempting to determine whether such an investment would be wise or prudent.
The prerelease advertising campaign promoted the car as having "more YOU ideas", and the teaser advertisements in magazines only revealed glimpses of the car through a highly blurred lens or wrapped in paper or under tarps. In fact, Ford had never “test marketed” the vehicle or its unique styling concepts with potential, “real” buyers prior to either the vehicle’s initial development decision or the vehicle’s shipments to its new dealerships. Edsels were shipped to the dealerships undercover and remained wrapped on the dealer lots.
The public also had difficulty understanding what the Edsel was, primarily because Ford made the mistake of pricing the Edsel within Mercury’s market price segment. Theoretically, the Edsel was conceived to fit into Ford’s marketing plans as the brand slotted in between Ford and Mercury. However, when the car debuted in 1958, its least expensive model—the Ranger—was priced within $73 of the most expensive and best-trimmed Ford sedan and $63 less than Mercury’s base Medalist model. In its mid-range pricing, Edsel's Pacer and Corsair models were more expensive than their Mercury counterparts. Edsel's top-of-the-line Citation four-door hardtop model was the only model priced to correctly compete with Mercury’s mid-range Montclair Turnpike Cruiser model.
Not only was the Edsel competing against its own sister divisions, but model for model, buyers did not understand what the car was supposed to be—a step above the Mercury, or a step below it.
After its introduction to the public, the Edsel did not live up to its preproduction publicity, even though it did offer many new features, such as self-adjusting rear brakes and automatic lubrication. While Ford's market research had indicated that these and other features would make the "E" car attractive to them as car buyers, the Edsel's selling prices exceeded what buyers were willing to pay. Upon seeing the price for a base model, many potential buyers simply left the dealerships. Other buyers were frightened by the price for a fully equipped top-of-the-line model.
The wrong car at the wrong time
One of the external forces working against the Edsel was the onset of an economic recession in late 1957.
Compounding Edsel's problems was the fact that the car had to compete with well-established nameplates from the Big Three, such as Pontiac, Oldsmobile, Buick, Dodge and DeSoto, as well as with its own internal sister division Mercury, which itself had never been a stellar sales success. To make matters still worse, as a new make, Edsel had established no brand loyalty with buyers, as its competing makes had.
Even if the 1957–1958 recession had not occurred, the Edsel would have been entering a shrinking marketplace. In the early 1950s, when the "E" car was in its earliest stages of development, Ford Executive Vice President Ernest R. Breech had successfully convinced Ford management that the medium-priced market segment offered great untapped opportunity. At the time, Breech's assessment was basically correct; in 1955, Pontiac, Buick and Dodge had sold a combined two million units. But by the fall of 1957, when the Edsel was introduced, the market had changed drastically. Independent manufacturers in the medium-priced field were drifting toward insolvency. Hoping to reverse its losses, Packard acquired Studebaker, which was also in financial difficulty. The board decided to stop production under the venerable Packard badge after 1958. The 1957-58 Packards were little more than Studebakers badged as Packards. Attempting to capitalize on the emerging consumer interest in economy cars, American Motors shifted its focus to its compact Rambler models and discontinued its pre-merger brands, Nash and Hudson, after the 1957 model year. Chrysler saw sales of its DeSoto marque drop dramatically from its 1957 high by over 50% in 1958. When DeSoto sales failed to rebound during the 1959 model year, plans were made in Highland Park to discontinue the nameplate during its 1961 model year run.
Indeed, sales for most car manufacturers, even those not introducing new models, were down. Among domestic makes, only Rambler and Lincoln produced more cars in 1958 than in 1957. Consumers started buying more fuel-efficient automobiles, particularly Volkswagen Beetles, which were selling at rates exceeding 50,000 a year in the U.S. from 1957 onward. Edsels were equipped with powerful engines and offered brisk acceleration, but they also required premium fuel, and their fuel economy, especially in city driving, was poor even by late-1950s standards.
Ford Motor Company had conducted the right marketing study, but it came up with the wrong product to fill the gap between Ford and Mercury. By 1958, consumers had become fascinated with economy cars, and a large car like the Edsel was seen as too expensive to buy and own. When Ford introduced the Falcon in 1960, it sold over 400,000 units in its first year. In a little-noted irony, Ford's investment in expanded plant capacity and additional tooling for the Edsel helped make the company's subsequent success with the Falcon possible.
By 1965, the market for medium-priced cars had recovered, and this time, Ford had the right car: The Galaxie 500 LTD. The LTD's success led Chevrolet to introduce the Caprice as a mid-1965 upscale trim option on its top-of-the-line Impala four-door hardtop.
Edsel, a difficult name to place
The name of the car, Edsel, is also often cited as a further reason for its lack of popularity. Naming the vehicle after Edsel Ford was proposed early in its development. However, the Ford family strongly opposed its use. Henry Ford II declared that he did not want his father's good name spinning around on thousands of hubcaps. Ford also ran internal studies to decide on a name, and even dispatched employees to stand outside movie theaters to poll audiences as to what their feelings were on several ideas. They reached no conclusions.
Ford retained the advertising firm Foote, Cone & Belding to come up with a name. When the agency issued its report, citing over 6,000 possibilities, Ford's Ernest Breech commented that they had been hired to develop a name, not 6,000. Early favorites for the name brand included Citation, Corsair, Pacer, and Ranger, which were ultimately chosen for the vehicle's series names.
David Wallace, manager of marketing research, and coworker Bob Young unofficially invited freethinker poet Marianne Moore for input and suggestions. Moore's unorthodox contributions (among them "Utopian Turtletop", "Pastelogram", "Turcotinga" and "Mongoose Civique") were meant to stir creative thought and were not officially authorized or contractual in nature.
At the behest of Ernest Breech, who was chairing a board meeting in the absence of Henry Ford II, the car was finally called "Edsel" in honor of Edsel Ford, former company president and son of Henry Ford.
Even though the Edsel shared its basic technology with other Ford products, a number of issues caused reliability problems, mostly with the 1958 models. Reports of mechanical flaws with the cars surfaced, due primarily to lack of quality control and confusion of parts with other Ford models. Ford never dedicated a stand-alone factory solely to Edsel model production. The first-year (1958) Edsels were assembled in both Mercury and Ford factories. The longer-wheelbase models, Citation and Corsair, were produced alongside the Mercury products, while the shorter-wheelbase models, Pacer and Ranger, were produced alongside the Ford products. Workers assembling Fords and Mercuries often found the task of assembling the occasional Edsel that moved down the line burdensome, since it required them to change tools and parts bins, then switch back to resume assembling Fords or Mercuries after completing assembly on the Edsel. The workers were also expected to accommodate Edsel assembly with no adjustment in their hourly quota of Ford and Mercury production. Consequently, the desired quality control of the different Edsel models proved difficult to achieve, even when the Fords and Mercuries were satisfactorily assembled on the same lines. Many Edsels actually left the assembly lines unfinished. Uninstalled parts were placed in the trunks along with installation instructions for dealership mechanics, some of whom never installed the additional parts at all. Some dealers did not even receive all the parts.
In the May 1958 issue of Popular Mechanics, 16% of Edsel owners reported poor workmanship, with complaints ranging from faulty welding to power steering failure. In its test car, Popular Mechanics tested for these problems and noted others, such as the trunk leaking badly in a storm and the odometer showing fewer than actual miles traveled.
The Edsel's most memorable design feature was its trademark "horsecollar" or toilet seat grille, which was quite distinct from other cars of the period. According to a popular joke at the time, the Edsel "resembled an Oldsmobile sucking a lemon". Some have speculated that the car failed to sell because its grille resembled a vulva.
The Edsel's front-end ensemble as it eventually appeared bore little resemblance, if any, to the original concept. Roy Brown, the original chief designer on the Edsel project, had envisioned a slender, almost delicate opening in the center. Engineers, fearing engine cooling problems, vetoed the intended design, which led to the now-infamous "horsecollar."
The vertical grille theme, while improved for the 1959 models, was discontinued for the 1960 models, which were similar to Ford models of the same year, although coincidentally, the new front-end design was very similar to that of the 1959 Pontiac.
The Teletouch pushbutton automatic transmission selector was an extremely complex feature. It proved problematic in part because the steering wheel hub, where the pushbuttons were located, was the traditional location of the horn button. Some drivers inadvertently shifted gears when they intended to sound the horn. While the Edsel was fast, the location of the transmission pushbuttons was not conducive to street racing. There were also jokes among stoplight drag racers about the buttons: D for Drag, L for Leap, and R for Race (instead of Drive, Low and Reverse). The control wires for Teletouch were also routed too close to the exhaust manifold, which often caused unpredictable movement of the selector mechanism.
Complaints also surfaced about the taillights on 1958-model Edsel station wagons. The lenses were boomerang-shaped and placed in a reverse fashion. At a distance, they appeared as arrows pointed in the opposite direction of the turn being made. When the left turn signal flashed, its arrow shape pointed right, and vice versa. However, there was little that could be done to give the Ford-based station wagons a unique appearance from the rear, because corporate management had insisted that no sheetmetal could be changed. Only the taillights and trim could be touched. There was room for separate turn signals in addition to the boomerangs, but the U.S. industry had never supplied them up to that point, and they were probably never seriously considered.
Mechanics of the time were wary of the 410-cubic-inch Edsel "E-475" engine because its perfectly-flat cylinder heads lacked distinct combustion chambers. The heads were set at an angle, with "roof" pistons forming both a squish zone on one side and a combustion chamber on the other. Combustion thus took place entirely within the cylinder bore. This design was similar to Chevrolet's 348-cubic-inch "W" engine, which was also introduced in 1958. While the design reduced the cost of manufacture and may also have helped minimize carbon buildup, it was also unfamiliar to many mechanics.
Company politics and the role of Robert McNamara
An intriguing aspect of the Edsel story is that it provides a case study in how company politics can kill an idea. While the car and Ford’s planning of the car are the most often cited reasons for its failure, internal Ford Motor Company memoranda indicate that the Edsel may actually have been a victim of dissension within Ford's management ranks.
Following World War II, Henry Ford II retained Robert McNamara as one of the "Whiz Kids" to help turn Ford around. McNamara’s cost-cutting and cost-containment skills helped Ford emerge from its near-collapse after the war. As a result, McNamara eventually amassed a considerable amount of power at Ford. McNamara was very much a throwback to Henry Ford in that, like the elder Ford, McNamara was committed to Ford to the almost total exclusion of the company's other products. Thus, McNamara had little use for the Continental, Lincoln, Mercury and Edsel brand cars made by the company.
McNamara opposed the formation of the separate divisions for Continental, Lincoln, Mercury, and Edsel cars, and moved to consolidate Lincoln, Mercury, and Edsel into the M-E-L division. McNamara saw to it that the Continental program was canceled and that the model was merged into the Lincoln range for 1958. He next set his sights on Edsel by maneuvering for elimination of the dual wheelbases and separate bodies used in 1958. Instead, the Edsel would share the Ford platform and use Ford’s inner body structure for 1959. In 1960, the Edsel emerged as little more than a Ford with different trim. McNamara also moved to reduce Edsel’s advertising budget for 1959, and for 1960, he virtually eliminated it. The final blow came in the fall of 1959, when McNamara convinced Henry Ford II and the rest of Ford's management structure that the Edsel was doomed and that it was time to end production before the Edsel bled the company dry. McNamara also attempted to discontinue the Lincoln nameplate, but that effort ended with Elwood Engel's now classic redesign of 1961. McNamara left Ford when he was named Secretary of Defense by President John F. Kennedy.
During the 1964 presidential election, Republican nominee Barry Goldwater blamed McNamara, then Secretary of Defense, for the Edsel's failure. Eventually, Ford's former executive vice president Ernest R. Breech, who was a financial contributor to Goldwater, wrote the Senator's campaign, explaining that "Mr. McNamara… had nothing to do with the plans for the Edsel car or any part of the program." However, the charge continued to be leveled against McNamara for years. During his time as head of the World Bank, McNamara instructed his public affairs officer to distribute copies of Breech's letter to the press whenever the accusation was made.
The Edsel Comet
The scheduled 1960 Edsel Comet compact car was hastily rebranded as the Comet and assigned to Lincoln-Mercury dealerships as a stand-alone product. Based on the new-for-1960 Ford Falcon, the Comet was an instant success, selling more cars in its first year than all models of Edsel produced during that marque's entire three-year run. Styling touches seen in the Comets sold to the public that allude to being part of the Edsel family of models included the instrument cluster, rear tailfins (though canted diagonally), and the taillight shape (the lens is visually similar to that used on the 1960 Edsel, and even retained the embossed "E" code). The Comet's keys were even shaped like Edsel keys, with the center bar removed from the "E" to form a "C."
For 1962, Ford officially assigned the Comet to the Mercury brand. The Mercury name does not appear anywhere on the 1960 and 1961 models.
More than half a century after its spectacular failure, the Edsel has become a highly collectible item among vintage car hobbyists. Fewer than 10,000 Edsels survive and are considered valuable collectors’ items. A mint 1958 Citation convertible or 1960 Ranger convertible may sell for over $100,000.
While the design was considered "ugly" fifty years ago, many other car manufacturers (such as Pontiac, Jaguar, BMW, Subaru, Lancia and Alfa Romeo) have employed similar vertical grilles successfully in their car designs. Many of the Edsel's features, such as transmission lock on ignition, self-adjusting brakes, gear selection by steering wheel buttons, etc., which were considered "too impractical" in the late 1950s, are now standard features of sports cars.
Even if the Edsel had survived beyond the early 1960s, it is far from certain that the brand would have lasted into the modern day. Chrysler discontinued the DeSoto brand at almost exactly the same time, Chrysler's announcement of the DeSoto's discontinuation coming only nine days after Ford's announcement of the Edsel's discontinuation. While the market for medium-priced cars would recover for a time, they would eventually be squeezed out due to Ford and Chevrolet having vehicles moving up into the medium-priced segment. Meanwhile, Dodge would move down into the low-priced field, which had traditionally been occupied by Plymouth. Although Oldsmobile was discontinued in 2004 in an unrelated move, the final death knell for the traditional domestic medium-priced brands was the Automotive industry crisis of 2008–2010. As a result of this crisis, General Motors and Chrysler filed for chapter 11 bankruptcy. This development saw the end of the Pontiac and Saturn brands by GM, while Ford's own Mercury division was discontinued in early 2011 despite Ford being in a healthy financial position. Mercury had been consistently rumored to be in danger from the early 1980s and in 1999 then-Ford CEO Jacques Nasser wanted to cut the brand, seeing it as an unnecessary expenditure upon discovering that its buyer demographic was nearly identical to that of the Ford brand. This would be the explanation for the brand's demise given by Ford upon its 2011 discontinuation. By the 2012 model year, Dodge and Buick were the only traditionally mid-priced divisions still in production, with Dodge having taken Plymouth's old spot within Chrysler and Buick arguably surviving only due to the brand's success in China.
Plastic scale models of all three Edsel years were produced by AMT, in its familiar 1/25 scale. Both promotional and kit versions were sold. These command premium prices today, especially the rare 1959 and 1960 models. The 1958 Pacer hardtop was re-issued as a totally new and much more detailed kit by AMT in the 1990s. The 1960 hardtop is also available as a resin kit from several resin model producers, but is typically priced close to the cost of an original kit. Yat Ming, a producer of diecast model cars, offered a nicely detailed 1958 Citation in 1/18 scale in both hardtop and convertible body styles. Yat Ming also produced a detailed 1/43 scale diecast of the Citation convertible in several color combinations. The Franklin Mint produced highly detailed 1/24 scale and 1/43 scale diecast models of the 1958 Citation convertible. The Danbury Mint produced a 1/24 scale diecast replica of the 1958 Bermuda station wagon, complete with accurately detailed wood trim.