Rover V8 engine History
|Manufacturer||General Motors Rover Land Rover MG TVR|
|Also called||Buick 215 V8|
|Predecessor||Rover 3-litre straight-six|
|Successor||Jaguar AJ-V8 TVR AJP8|
View cars with the Rover V8 engine Here
The Rover V8 engine is a compact V8 internal combustion engine with aluminium cylinder heads and cylinder block, originally designed by General Motors and later re-designed and produced by Rover in the United Kingdom. It has been used in a wide range of vehicles from Rover and other manufacturers since its British debut in 1967.
The Rover V8 began life as the Buick 215, an all-aluminium engine introduced in 1960 for the 1961 US model year. The compact engine was light, at just 144 kg (318 lb), and capable of high power outputs: the most powerful Buick version of this engine rated 149 kW (200 hp), and the very similar Oldsmobile "Jetfire" turbocharged version made 215 hp (both numbers SAE gross). Based on sales volume and press reports, the engine was a success. Buick produced 376,799 cars with this engine in just three years. A comparable number of Oldsmobile 215 engines were produced. In addition, some Pontiac models were fitted with the Buick 215, leading to the nickname "BOP 215" for the engine (BOP standing for Buick/Oldsmobile/Pontiac). The aluminium engine was relatively expensive to produce, however, and it suffered problems with oil and coolant sealing, as well as with radiator clogging from use of antifreeze incompatible with aluminium. As a result, GM ceased production of the all-aluminium engine after 1963, although Buick retained a similar iron engine (1964–1980), as well as a V6 derivative (1962–2008) which proved to have a very long and successful life.
In January 1964 Rover gave American operations head J. Bruce McWilliams permission to investigate the possible purchase of an American V8 engine for Rover cars. It is usually said that McWilliams first saw the Buick V8 at the works of Mercury Marine, where he was discussing the sale of Rover gas turbines and diesel engines to the company (Mercury did indeed use the Land Rover 2.25 litre diesel engine in marinised form). However, it is likely that McWilliams was aware of the Buick engine before this. In any case, McWilliams realised that the lightweight Buick V8 would be ideal for smaller British cars (indeed, it weighed less than many straight-4 engines it would replace). McWilliams and William Martin-Hurst began an aggressive campaign to convince GM to sell the tooling, which they finally agreed to do in January 1965. Retiring Buick engineer Joe Turlay moved to the UK to act as a consultant.
The Rover V8 has long been a relatively common engine for kit car and hot rod use in Britain, much as the Chevrolet small-block V8 is for American builders (though many British hot rods have traditionally used four cylinder engines, like the Ford Pinto and Crossflow units). Even in the US there is a strong contingent of builders who select the Buick or Rover aluminium V8 engine for use in small sporty cars like the MGB and the Chevy Vega. Note also that the 1964 Buick iron-block 4,920 cc (300 cu in) engine had aluminium cylinder heads and a longer stroke crankshaft, which with minor modifications can be used with the Buick 215 or Rover engine blocks to produce a high-output, very light weight V8 with displacement of up to about 300 cubic inches. The 300 crank in the 215 block yields 4,260 cc (260 cu in).
The British made engines were run on two SU carburettors (14 years), then two Stromberg carburettors (2–3 years), Bosch L-Jetronic (7–8 years, aka Lucas 4CU Flapper), then Hitachi Hotwire (5 years, aka Lucas 14CUX), then the GEMS system (many years) and finally Bosch Motronics for 2 years. The engine is still cast now (2011), in an improved version, by Coscast in Birmingham, UK.
As well as appearing in Rover cars, the engine was widely sold by Rover to small car builders, and has appeared in a wide variety of vehicles. Rover V8s feature in some models from Morgan, TVR, Triumph, Land Rover and MG, among many others.
The demise of the MG Rover Group in 2005 led to a halt in production of the famed name "Rover V8" after 40 years. The last Rover to have a real Rover V8 was the Rover SD1 Vitesse which was replaced by the Rover 827 Vitesse with a 2.7 litre Honda V6 unit, The Rover V8 remained with Land Rover when it was sold to Ford by BMW. Although Land Rover has switched to the Jaguar AJ-V8 engine for new applications, they wanted production of the engine to continue, and they arranged for production to restart in Weston-super-Mare under MCT, an engineering and manufacturing company. MCT will continue limited production of the engine for the foreseeable future, supplying engines for aftermarket and replacement use.
It is also interesting to note that the Rover V8 based on the Buick design was not the first V8 produced by Rover. When the Rover Company was having engineering differences of opinion regarding the development of the Whittle turbine engine, the Wilks brothers did a deal with Rolls-Royce to swap technologies. The turbine engine project went to Rolls-Royce and Rover Co took over the V12 Meteor production used in the Centurion Tank. From this a V8 variant was developed. The Rover Meteorite, also known as Rolls-Royce Meteorite, was a V8 petrol engine of 18.01 L (1,099 cu in) capacity. In essence it was two-thirds of a V12 Meteor, and it shared the Meteor's 60° bank angle. Meteorites were built for vehicles, for marine use and as stationary power units: it powered the Thornycroft Antar or Mighty Antar Tank Transporter – and as such was used to transport Meteor-engined tanks – and also heavy transport on the Snowy Mountains Hydro-Electric Scheme in Australia.
As the aluminium block made this engine one of the lightest stock V8s built, it was an obvious choice for use in racing. Mickey Thompson entered a car powered by this engine in the 1962 Indianapolis 500. From 1946 to 1962 there had not been a single stock-block car entered in this famous race. In 1962 the Buick 215 was the only non-Offenhauser powered entry in the field of 33 cars. Rookie driver Dan Gurney qualified eighth and raced well for 92 laps before retiring with transmission problems.
The Rover version of this engine was extensively developed and used for rally racing, especially in Triumph TR8 sports cars.
The Australian Repco V8 F1 engine being based on Buick 215 block is a common misconception, as the Rover/Buick V8 had 5 cylinder-head-studs per cylinder configuration that cannot accommodate the 6 stud Repco RB620 heads. The Repco V8 was based on Oldsmobile 215 block of the same era, which was quite similar in appearance, size and material, but with 6 cylinder-head-studs per cylinder. The difference in block design originated in Oldsmobile's intention to produce the higher power, turbo-charged Jetfire version of the small/light V8, however, the public/press tended not to be aware of the internal difference.
The initial Rover version of the engine had a displacement of 3,528 cc (215.3 cu in). The bore was 88.9 mm (3.50 in) and the stroke was 71.0 mm (2.80 in). It used a sand-cast block with pressed-in iron cylinder liners, and a new intake manifold with two SU carburettors. The Rover engine was heavier but stronger than the Buick engine, with a dry weight of about 170 kg (375 lb). It was first offered in the 1967 Rover P5B saloon, initially making 160 PS (118 kW; 158 hp) at 5,200 rpm and 210 lb·ft (280 N·m) of torque at 2,600 rpm on 10.5:1 compression. With the introduction of the Rover SD1 in 1975, the engine was dramatically improved with the 'rope' oil seals replaced with poly items and the spark plug dimensions changed.
- 1967–1973 Rover P5B
- 1968–1976 Rover P6
- 1968–1990 Morgan Plus 8
- 1970–1989 Land Rover Range Rover
- 1973–1976 MGB GT V8
- 1972–1978 Land Rover 101 Forward Control military vehicle
- 1979–1981/2 Triumph TR8
- 1978–1985 Land Rover Series III "Stage One"
- 1976–1987 Rover SD1
- 1976–1990 Argyll
- 1980–1990 TVR 350i
- 1989–2004 Land Rover Discovery
- 1983–1994 Land Rover 90/110/Defender
- 1986–1991 Sisu NA-140 BT all-terrain transport vehicle
In the late 1970s, British Leyland became aware of the increasing importance of diesel engined cars to the British, European and (especially) North American markets in the wake of the 1979 energy crisis. It was decided that a new series of diesel engines powerful, refined and economical enough for use in BL cars was needed. However, with development funding tight, it was necessary to use existing BL petrol engines as a base. This included a diesel version of the 3.5-litre V8, the development project for which was code-named 'Iceberg'. BL collaborated with Perkins Engines of Peterborough to develop the engine. Both naturally aspirated and turbocharged versions were produced, both using a Stanadyne rotary mechanical fuel injection system. Power outputs of around 100 (naturally aspirated) and 150 (turbocharged) horsepower were achieved. The Iceberg engine was slated for fitment in the Range Rover, Rover SD1 and the Jaguar XJ but the project encountered problems with failure of the alloy cylinder heads and internal cooling. They were limited by the need to use the same basic block casting as the petrol engine to allow the Iceberg engine to be produced on the same production line to reduce costs. Whilst these problems could have been overcome, the project ran into financial and logistical problems caused by the reorganisation of BL and specifically the splitting of Land Rover and Rover into separate divisions. Land Rover took over production of the V8 engine in 1982, moving it from the main BL engine plant at Acock's Green into a new, much lower-capacity production line in the Solihull works, where it was built alongside the other Land Rover engines. This meant that there was no spare capacity to build diesel versions of the engine. Coupled to this, it was clear that the market for large diesel engined cars in North America had not developed as expected. BL finally pulled out of the project in 1983. Perkins initially decided to pursue the project alone, and even produced advertising brochures for the engine as an industrial power unit, but BL withdrew all technical support and Project Iceberg was wrapped up in late 1983. BL's other collaboration with Perkins (producing a diesel version of the O-Series engine) produced the highly successful 'Prima' unit. BL (and its Rover Group successor) bought in 2.5-litre 4-cylinder turbodiesel units from VM Motori to use in the SD1 and Range Rover.
Land Rover used a 3,946 cc (240.8 cu in) version of the Rover V8 through the 1990s. Bore was increased to 94.0 mm (3.70 in) and stroke remained the same at 71.0 mm (2.80 in). The engine was revised in 1995 (and thereafter referred to as a 4.0 to differentiate it from the earlier version, although displacement remained the same at 3,946 cc) with a new intake and exhaust system, extra block ribbing, revised pistons, and larger cross-bolted main-bearings. The 1995 4.0 produced 190 hp (142 kW) and 236 lb·ft (320 N·m) .
Production of the 4.0 ended in 2003. The final version of the engine, used in the 2003 Land Rover Discovery, produced 188 hp (140 kW) at 4,750 rpm and 250 lb·ft (340 N·m) at 2,600 rpm.
- 1990–2004 Morgan Plus 8
- 1991–1995 Ginetta G33
- 1992–1996 MG RV8
- 1986–1993 TVR S Series
- 1989–1995 Land Rover Range Rover (known as a 3.9 in this application)
- 1992–2001 TVR Chimaera
- 1992–2000 TVR Griffith
- 1995–2003 Land Rover Range Rover in SE trim
- 1994–1998 Land Rover Defender (only used as standard on USA-spec vehicles- available only to special order in other markets.)
- 1986–1991 Sisu NA-140 BT all-terrain transport vehicle
- 1991–2009 Westfield SEight
- 1998 Land Rover Defender 50th Anniversary Limited Edition
- 1996-2002 Land Rover Discovery Series I,II
In the early 1980s TVR approached Andy Rouse with a view to using his race-developed 3.9L variant of the V8 in their Rover-powered 350i 'wedge'; Rouse had successfully campaigned a Rover SD1 with a modified V8 on the track. For a number of reasons (primarily cost) Rouse's version was not used, but the concept was passed to alternative engineering firms which resulted in a rare variant of the 3.9. This unit has 93.5mm cylinder bores (instead of Rover's own 94mm that was introduced some years later) and thus has a capacity of 3,905cc. Flat-topped pistons and high-lift camshaft gave a compression ratio of 10.5:1. TVR claimed 275 bhp as the output and whilst this is generally disregarded by aficionados, a healthy 3,905 cc engine will produce in excess of 240 bhp. Once a reproducible specification had been determined, the bulk of engine production was undertaken by North Coventry Kawasaki (NCK), which company was subsequently purchased by TVR to become their in-house engine division known as TVR Power. About 100 cars were built with the 3,905 cc engine; TVR's later '400' offering being based on the then-current Range Rover 4L of 3,946 cc.
- 1986–1989 TVR 390SE
Land Rover extended the 3,946 cc engine for the top LSEspecification of the Classic Range Rover. The 4.2 L engine had a displacement of 4,275 cc (260.9 cu in), and used the crankshaft castings from the failed "Iceberg" diesel engine project Bore remained the same at 94.0 mm (3.70 in), while stroke increased to 77.0 mm (3.03 in).
- 1992–1995 Land Rover Range Rover
For the Griffith and Chimaera, TVR Power, a Coventry-based subsidiary of sportscar maker TVR, built a Rover V8-version with a 4,280 cc (261 cu in) displacement using the 77 mm (3.0 in) stroke crankshaft as per the Land Rover 4.2 engine, but with a 94 mm (3.7 in) bore size. The so-called 'pre-cat' versions of the Griffith predominantly used this engine, although a 4.0 litre version was also available. The Chimaera was introduced with choice of 4.0 and 4.3 litre engines. A small number of 'Big Valve' versions, sporting modified cylinder heads with 43 mm (1.7 in) intake and 37 mm (1.5 in) exhaust valves and a more radical camshaft profile, found their way to early Griffiths and Chimaeras.
Around 1993, a number of Westfield SEight models were equipped with a John Eales-built 4.3 litre engine.
- 1992–1993 TVR Griffith
- 1993–1994 TVR Chimaera
- 1993–2009 Westfield SEight
Leyland of Australia produced a special 4,416 cc (269.5 cu in) version of the aluminium V8 for their Australia-only 1973 Leyland P76. The bore was 88.9 mm (3.50 in) and the stroke was 88.9 mm (3.50 in), making it a square engine. The block deck height was extended and longer conrods were fitted 158.75 mm (6.250 in) between centres. This rare engine produced 200 hp (149 kW) and 280 ft•lbf (380 N•m) and although export (to the UK) versions were planned, the closure by British Leyland of their Australian operations in 1975 precluded the widespread application of this engine.
- 1973–1975 Leyland P76
- Leyland Terrier truck
Not to be confused with the later 4.6 litre engine which TVR badged as a '4.5' for the Chimaera, there also existed a version with an 80 mm (3.1 in) crank and 94 mm (3.7 in) bore giving 4,444 cc (271.2 cu in) capacity, which was used by TVR in the low-volume special 450 SEAC, the race version thereof and the subsequent Tuscan Challenge racers. A tiny number of Griffith and Chimaera road cars were built with a version of this engine, known as the '450 BV' (Big Valve).
In 1996, Land Rover enlarged the Rover V8 to 4,552 cc (277.8 cu in). The bore remained the same size as the previous 4.0 at 94.0 mm (3.70 in), but the engine was stroked by 10.9 mm (0.43 in) giving 82 mm (3.2 in) in total. Output was 225 hp (168 kW) and 280 ft•lbf (380 N•m).
Production of the 4.6 ended at Solihull, UK, in 2002. The final version, used in the Range Rover, produced 222 hp (166 kW) at 4,750 rpm and 300 ft•lbf (407 N•m) at 2,600 rpm.
The last mass-produced application of the Rover V8 was the Land Rover Discovery, up until the vehicle was redesigned in 2005. It is still used by some hand-built sports cars built by some independent manufacturers.
- 1995–2002 Land Rover Range Rover in the HSE trim
- 2003–2004 Land Rover Discovery
- 1996–2002 TVR Chimaera
A 5 litre 4,997 cc (304.9 cu in) variant of the Rover V8 was used in two models by British sportscar manufacturer TVR. The bore was 94.0 mm (3.70 in) and the stroke was 90.0 mm (3.54 in). These models, the Griffith and Chimaera used the 5 litre unit in their top-end specifications. The factory quotes up to 340 bhp (254 kW) and 350 lbf·ft (470 N·m) of torque.
- 1990-1995 Lichfield Land Rovers
- 1992–2001 TVR Chimaera
- 1992–2000 TVR Griffith
- 2002–2006 Bowler Wildcat- this used a hybrid 5.0-litre V8 with Land Rover cylinder heads and a TVR block and piston assembly.
Moreover, in the mid-1980s, hot rodders discovered the 215 could be stretched to as much as 5 l (305 cu in), using the Buick 300 crankshaft, new cylinder sleeves, and an assortment of non-Buick parts.It could also be fitted with high-compression cylinder heads from the Morgan +8. Using the 5 liter Rover block and crankshaft, a maximum displacement of 5,208 cc (317.8 cu in) is possible and used primarily in racing applications.