|(1974 to 1998)|
|Manufacturer||Française de Mécanique|
|Successor||PSA ES / Renault L engine|
The PRV engine is an automobile petrol V6 engine that was developed jointly by Peugeot, Renault and Volvo Cars – and sold from 1974 to 1998. It was gradually replaced after 1994 by another joint PSA-Renault design, known as the ES engine at PSA and the L engine at Renault. It is designed and manufactured by the company "Française de Mécanique" for PSA, Renault and Volvo.
In 1966, Peugeot and Renault entered a cooperative agreement to manufacture common components. The first joint subsidiary, La Française de Mécanique (also called Compagnie Française de Mécanique or simply FM) was launched in 1969. The FM factory was built in Douvrin near Lens in northern France. The PRV engines are sometimes referred to as "Douvrin" engines, though that name is more commonly applied to a family of straight-4s produced at the same time.
In 1971, Volvo joined Peugeot and Renault in the creation of the PRV company, a public limited company (plc) in which each of the three manufacturers owned an equal portion. The company originally planned to build V8 engines, although these were later scrapped in favor of a smaller and more fuel-efficient V6.
The PRV engine could be seen as a V8 with two missing cylinders, having a 90 degree angle between cylinder banks, rather than the customary 60, but with crankpins being 120 degrees apart. The Maserati V6 of the Citroën SM followed a remarkably similar pattern of development.
The 1973 energy crisis, and taxes levied against engine displacement greater than 2.8 litres made large V8 engines somewhat undesirable, and expanded the market for smaller displacement engines.
Additionally, Renault needed a V6 engine to fit in its new model, the Renault 30. Renault's internal designation for the PRV was Z-Type.
Machinery for assembling the engines arrived at Douvrin in early June 1973, and buildings for producing the engines were finished in January 1974. The first PRV engines were officially introduced on 3 October 1974 in the Volvo 264. Adoption was swift, and the PRV V6 had been sold in at least five different models by the end of 1975.
In 1984, the first commercially available turbocharged PRV V6 was sold in the Renault 25 V6 Turbo. This was the first to be even-fire with split crankpins, and was the first of the second generation, and indeed EFI engine of any sort. Turbocharged versions went on to be used in the Renault Alpine GTA V6 Turbo (essentially the same engine as the 25 Turbo at 2,458 cubic centimetres (150.0 cu in)), Renault Alpine A610, and Renault Safrane Bi-turbo – both with 2,963 cubic centimetres (180.8 cu in) low compression. Naturally aspirated 2,963 cubic centimetres (180.8 cu in) and 2,975 cubic centimetres (181.5 cu in) versions of both low and high compresson 3 litre engines appeared in a number of Peugeot, Citroen and Renault cars until 1997.
While Renault were working forced induction into the PRV, Peugeot and Citroen developed their own 24 valve engines as an option in the 605 and XM respectively. The compression remained the same as the Renault 12v, but the pistons differed, as did some of the timing gear, and the heads were re-engineered to allow easier maintenance (the camshaft being fitted from the opposite end for example). This engine was however extremely expensive, and suffered cam wear problems. This was due to the exhaust valves sharing a single lobe, while each inlet valve had its own lobe. This was at least partially solved by the use of ceramic followers as one of a succession of recalls.
Meanwhile, French supercar manufacturer Venturi had been developing their own versions of the PRV. The most powerful versions they built were in the Atlantique 300 at 207 kilowatts (281 PS; 278 bhp) from a single turbocharged 3.0 L 12v, and they successfully raced at the 24 Hours of Le Mans with the 600LM with a twin turbocharged 24v 3.0 litre, pushing out over 450 kilowatts (610 PS; 600 bhp) in race spec, and the road-going spin-off, the 400GT managed 300 kilowatts (408 PS; 402 bhp). This used the low compression bottom end common to the Renault turbo engines, coupled to 24 valve cylinder heads with bespoke rockers and tappets.
Peugeot too allowed a small group of engineers to create a team for endurance racing, and after a few years the team grew to be called WM Peugeot. The ultimate version of the car used a low compression 3.0 litre bottom end coupled to bespoke twin-cam heads. It is the only DOHC PRV. This car still holds the top speed record at 24 Hours of Le Mans set in 1988. By taping over the engine cooling intakes to improve aerodynamics, the team managed to push the car to 407 kilometres per hour (253 mph) on the 5 kilometres (3.1 mi) straight before the engine was destroyed.
Volvo began to withdraw from the PRV consortium in the late 1980s, shifting its powerplant reliance onto in-house inline engines. Peugeot, Renault and Citroën continued using the PRV until 1997.
After producing 970,315 units, production of the PRV V6 was stopped on 15 June 1998.
The original engineering work done on the V8 engine can still be seen in the resulting V6 engine: its cylinder banks are arranged at 90°, instead of the much more common 60°. V8 engines nearly universally feature 90° configurations, because this allows for a natural firing order. V6 engines, on the other hand, are generally arranged at 60° (again because of timing), but can be built as 90° engines, with either staggered timing or split crankshaft journals. 90° V6 engines are shorter and wider than 60° engines, allowing lower engine bay hood/bonnet profiles.
First-generation PRV engines (1974–1985) featured uneven ignition timing. Second generation PRV engines (introduced in 1984 in the Renault 25 Turbo) featured split crankshaft journals and even ignition timing all electronically controlled. Other similar design examples are the odd-fire and even-fire Buick V6 and the Maserati V6 seen in the Citroën SM.
- Z7U-702: Used in the Renault 25 V6 Turbo
- Z7U-730: turbocharged version used in the Renault Alpine V6 Turbo
- Z7X-711: Used in the Eagle Premier/Dodge Monaco
- Z7X-715: Used in the Eagle Premier/Dodge Monaco
- ZM112: Carbureted version used in the Peugeot 504
- ZMJ140: Fuel-injected version used in the Peugeot 504
- ZMJ-159: Fuel-injected version used in the DeLorean DMC-12
- ZN3J: Fuel-injected version used in the US-spec Peugeot 505
- ZNJK: Fuel-injected version used in the Peugeot 604
- Z6W-A 700: 2849 cc carbureted version used in Renault Alpine V6 GT
- power (DIN): 100 kilowatts (136 PS; 134 bhp) at 92 r/s (136 hp at 5,500 rpm)
- power (SAE): 97 kilowatts (132 PS; 130 bhp) at 92 r/s (130 hp at 5,500 rpm)
- torque (DIN): 215 newton metres (159 lbf·ft) at 48 r/s
- torque (SAE): 208 newton metres (153 lbf·ft) at 48 r/s (153 lb·ft at 2,750 rpm)
- compression ratio: 8.8:1
- cylinder bore: 91 millimetres (3.58 in)
- piston stroke: 73 millimetres (2.87 in)
- displacement: 2,849 cubic centimetres (173.9 cu in)
- firing order: 1-6-3-5-2-4
- mass (weight): ~150 kilograms (331 lb)
PRV powered automobiles
- Alpine A310 (October 1976)
- Alpine A610 (1991)
- Alpine GT/GTA (1984)
- Citroën XM (1989)
- DeLorean DMC-12 (1981–1983)
- Dodge Monaco (1990–1992)
- Eagle Premier (1988–1992)
- Helem V6
- Lancia Thema (1984-1992)
- Peugeot 504 coupé/cabriolet (1974/1975)
- Peugeot 505 (July 1986)
- Peugeot 604 (March 1975)
- Peugeot 605 (1990)
- Renault 25 (1984)
- Renault 30 (March 1975)
- Renault Espace
- Renault Laguna
- Renault Safrane
- Talbot Tagora (1980)
- UMM Alter II (90's)
- Venturi (all models)
- Volvo 242GLT/6/244GLT/6/245GLT/6c/262/262C/264/265 (October 1974)
- Volvo 760 GLE (February 1982)
- Volvo 780 (1985)
- Volvo 960 (rare 1991 models)